検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 183 件中 1件目~20件目を表示

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

Research on improvement of HTGR core power-density, 4; Feasibility study for a reactor core

沖田 将一朗; 水田 直紀; 高松 邦吉; 後藤 実; 吉田 克己*; 西村 洋亮*; 岡本 孝司*

Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 10 Pages, 2023/05

Adoption of SiC-matrix fuel elements in future pin-in-block type HTGR designs will enhance oxidation resistance of the fuel element in the event of the air ingress accident, one of the most worrisome accidents in HTGRs. This would eliminate the need for the graphite sleeves used in the current pin-in-block type HTGR designs and enable high power density core designs with sleeveless and direct coolable fuel structure. Such a concept itself has been suggested by Japan Atomic Energy Agency (JAEA) in the past. However, JAEA has not yet demonstrated the feasibility for a core design with the SiC-matrix fuel elements. The present work is intended to demonstrate the feasibility for a new core design upgraded from an existing conceptual core design, called HTR50S, with 50 MW thermal power and reactor outlet temperature of 750$$^{circ}$$C. The new core design uses SiC-matrix fuel elements and increases the reactor power density to 1.2 times higher than the original HTR50S design. The feasibility is determined by whether the core satisfies the target values in nuclear and thermal-hydraulic designs by performing burn-up calculation with the whole core model and fuel temperature calculations. The calculation results showed that the new core design satisfied these target values on the reactor shutdown margin, the temperature coefficient of reactivity, and the maximum fuel temperature during normal operation.

論文

The OECD/NEA Working Group on the Analysis and Management of Accidents (WGAMA); Advances in codes and analyses to support safety demonstration of nuclear technology innovations

中村 秀夫; Bentaib, A.*; Herranz, L. E.*; Ruyer, P.*; Mascari, F.*; Jacquemain, D.*; Adorni, M.*

Proceedings of International Conference on Topical Issues in Nuclear Installation Safety; Strengthening Safety of Evolutionary and Innovative Reactor Designs (TIC 2022) (Internet), 10 Pages, 2022/10

The WGAMA activity achievements have been published as technical reports, becoming reference materials to discuss innovative methods, materials and technologies in the fields of thermal-hydraulics, computational fluid dynamics (CFD) and severe accidents (SAs). The International Standard Problems (ISPs) and Benchmarks of computer codes have been supported by a huge amount of the databases for the code validation necessary for the reactor safety assessment with accuracy. The paper aims to review and summarize the recent WGAMA outcomes with focus on new advanced reactor applications including small modular reactors (SMRs). Particularly, discussed are applicability of major outcomes in the relevant subjects of passive system, modelling innovation in CFD, severe accident management (SAM) countermeasures, advanced measurement methods and instrumentation, and modelling robustness of safety analysis codes. Although large portions of the outcomes are considered applicable, design-specific subjects may need careful considerations when applied. The WGAMA efforts, experiences and achievements for the safety assessment of operating nuclear power plants including SA will be of great help for the continuous safety improvements required for the advanced reactors including SMRs.

論文

Predictive modeling of a simple field matrix diffusion experiment addressing radionuclide transport in fractured rock. Is it so straightforward?

Soler, J. M.*; Neretnieks, I.*; Moreno, L.*; Liu, L.*; Meng, S.*; Svensson, U.*; Iraola, A.*; Ebrahimi, K.*; Trinchero, P.*; Molinero, J.*; et al.

Nuclear Technology, 208(6), p.1059 - 1073, 2022/06

 被引用回数:4 パーセンタイル:45.99(Nuclear Science & Technology)

SKBタスクフォースは、亀裂性岩石中の地下水流動と物質移行のモデル化に関する国際フォーラムである。WPDE試験はフィンランドのオンカロ地下施設において実施された片麻岩中のマトリクス拡散試験である。複数の非収着性及び収着性のトレーサーを含む模擬地下水が試錐孔の試験区間に沿って注入された。タスク9Aは、WPDE試験で得られたトレーサー破過曲線に対する予測モデリングを行うことを目的とした。複数のチームが本タスクに参加し、異なるモデル化手法とコードを用いた予測解析を行った。この予測解析の重要な結論は、試錐孔の開口部における地下水流動に関連する分散パラメータにモデル化結果が大きく影響されることである。マトリクス拡散及び収着に関連する破過曲線のテール部に着目すると、異なるチーム間の解析結果の差異は相対的に小さい結果となった。

論文

Boundary condition free homogenization and evaluation of its performance in fast reactor core analysis

丸山 修平

Proceedings of International Conference on Physics of Reactors 2022 (PHYSOR 2022) (Internet), 10 Pages, 2022/05

本論文は新しい均質化法「Boundary Condition Free Homogenization (BCFH)」を提案した。従来の均質化法では、セル計算において特定の境界条件または周辺領域を仮定することにより、炉心計算とセル(集合体)計算を分離している。これらの仮定にはあいまいさや近似があり、評価結果の精度の低下を引き起こす原因にもなる。BCFHはこれらの問題を回避し、均質化等に係るセル計算の精度を向上させることを目的としている。著者は反応率保存に関連するセル内の物理量が流入部分中性子流に対して保存されるという条件を課した。すなわち、セル平均中性子束と流出部分中性子束の応答行列は均質-非均質系で同じになるものとした。これにより得られる断面積,SPH因子,不連続因子等の均質化パラメーターは特定の境界条件に依存しなくなる。このようにして得られた新しい均質化パラメータは、従来のベクトル形式から行列形式に拡張されたものとなる。BCFHの性能を調査するために、我が国のナトリウム冷却高速炉の炉心概念を使用して数値実験を行った。その結果、BCFHは従来の方法と比較して制御棒の反応度価値や反応率分布を評価するのに特に有効であることがわかった。この結果に基づき、BCFHは炉心解析における1つの有望な均質化の概念になりえると結論付けた。

論文

A Scaling approach for retention properties of crystalline rock; Case study of the in-situ long-term sorption and diffusion experiment (LTDE-SD) at the $"A$sp$"o$ Hard Rock Laboratory in Sweden

舘 幸男; 伊藤 剛志*; Gylling, B.*

Water Resources Research, 57(11), p.e2020WR029335_1 - e2020WR029335_20, 2021/11

 被引用回数:2 パーセンタイル:18.22(Environmental Sciences)

本論文では、エスポ岩盤研究所で実施された原位置長期収着・拡散試験(LTDE-SD)のデータセットを用いて、収着及び拡散パラメータを実験室から原位置条件へと条件変換する手法を構築した。亀裂表面と岩石マトリクスの表面近傍の不均質性は、表面近傍での高い間隙率,拡散及び収着特性と、その段階的な変化を仮定した概念モデルによって評価された。非収着性のCl-36と低収着性のNa-22のモデル化結果によって、表面近傍の5mmの擾乱領域における間隙率と拡散係数の変化を考慮した概念モデルの妥当性が確認された。また、これらの陽イオンと陰イオンの拡散係数は、典型的な陽イオン加速と陰イオン排除の傾向を示した。一方で、収着メカニズムの異なる高収着性トレーサー(Cs-137, Ra-226, Ni-63, Np-237)のモデル化結果から、粒径サイズと収着分配係数との相関関係と、その表面近傍の擾乱との関係から条件変換する手法の有効性が確認された。

論文

Quantifying the porosity of crystalline rocks by in situ and laboratory injection methods

M$"o$ri, A.*; Mazurek, M.*; 太田 久仁雄; Siitari-Kauppi, M.*; Eichinger, F.*; Leuenberger, M.*

Minerals (Internet), 11(10), p.1072_1 - 1072_17, 2021/10

 被引用回数:4 パーセンタイル:34.69(Geochemistry & Geophysics)

The porosity and pore geometry of rock samples from a coherent granodioritic rock body at the Grimsel Test Site in Switzerland was characterised by different methods using injection techniques. Results from in situ and laboratory techniques are compared by applying in situ resin impregnation techniques as well as rock impregnation and mercury injection under laboratory conditions. In situ resin impregnation of the rock matrix shows an interconnected pore network throughout the rock body, providing an important reservoir for pore water and solutes, accessible by diffusion. Porosity and pore connectivity do not vary as a function of distance to brittle shear zones. In situ porosity is about half the porosity value that was determined on rock samples in the laboratory. This could be due to that such samples were affected by artefacts created since core recovery. The extrapolation of laboratory measurements to in situ conditions requires great care and may not be feasible in all cases.

論文

Treatment of R-matrix Limited Formula in FRENDY

多田 健一; 国枝 賢

KURNS-EKR-5, p.229 - 232, 2019/12

R-matrix Limitedは共鳴断面積を表記する最新の共鳴公式である。近年、ENDF/B-VIII.0やJEFF-3.3など、最新の評価済み核データライブラリへの導入が進められており、今後の導入拡大が予想される。R-matrix Limitedは従来の共鳴公式とは大きく異なっていることから、R-matrix Limitedを取り扱うためには大幅な修正が必要となる。本研究では、原子力機構が開発している核データ処理コードFRENDYでR-matrix Limitedを取り扱えるようにするため、AMURコードを取り込んだ。核データ処理結果をNJOY2016と比較したところ、FRENDYが適切にR-matrix Limitedを取り扱えることを確認した。

論文

Measurement of the CKM matrix element $$|V_{cb}|$$ from $$B^0to D^{*-}ell^ {+} nu_ell$$ at Belle

Waheed, E.*; 谷田 聖; Belle Collaboration*; 他187名*

Physical Review D, 100(5), p.052007_1 - 052007_32, 2019/09

 被引用回数:43 パーセンタイル:91.47(Astronomy & Astrophysics)

We present a new measurement of the CKM matrix element $$|V_{cb}|$$ from $$ B^{0} rightarrow D^{*}ell nu$$ decays, reconstructed with full Belle data set ($$711 , rm fb^{-1}$$). Two form factor parameterisations, based on work by the CLN and BGL groups, are used to extract the product $$mathcal{F}(1)eta_{rm EW}|V_{cb}|$$ and the decay form factors, where $$mathcal{F}(1)$$ is the factor normalisation and $$eta_{rm EW}$$ is a small electroweak correction. In the CLN parameterisation we find $$mathcal{F}(1)eta_{rm EW}|V_{cb}| = (35.06 pm 0.15 pm 0.54) times 10^{-3}$$, $$rho^{2}=1.106 pm 0.031 pm 0.007$$, $$R_{1}(1)=1.229 pm 0.028 pm 0.009$$, $$R_{2}(1)=0.852 pm 0.021 pm 0.006$$. In the BGL parameterisation we find $$mathcal{F}(1)eta_{rm EW}|V_{cb}|= 38.73 pm 0.25 pm 0.60$$, which is higher but consistent with the determination from inclusive semileptonic $$B$$ decays when correcting for $$mathcal{F}(1)eta_{rm EW}$$. This is the most precise measurement of $$mathcal{F}(1)eta_{rm EW}|V_{cb}|$$ and form factors that has ever been carried out, and the first direct study of the BGL form factor parameterisation in an experimental measurement.

論文

J-PARC RCS; High-order field components inherent in the injection bump magnets and their effects on the circulating beam during multi-turn injection

發知 英明; 原田 寛之; 高柳 智弘

Proceedings of 10th International Particle Accelerator Conference (IPAC '19) (Internet), p.2009 - 2012, 2019/06

In the J-PARC RCS, we investigated the influences of high-order field components inherent in four sets of injection bump magnets (dipole magnets) on the circulating beam during multi-turn injection. Ideally, the injection bump fields including the high-order field components are cancelled out with each other through the integration over the four injection bump magnets. But, in the RCS, such a field compensation is incomplete owing to the effects of magnetic interferences and feed-down fields. The residual high-order field components, not cancelled out, have a significant influence on the circulating beam via the excitation of high-order random betatron resonance. In this paper, we discuss the detailed mechanism of emittance growth and beam loss caused by the high-order field components of the injection bump magnets including their correction scenario, on the basis of numerical simulation and experimental results.

論文

3D X Ray micro-tomography as a tool to formulate metakaolin-based geopolymer-oil emulsions

Lambertin, D.*; Davy, C. A.*; Hauss, G.*; Planel, B.*; Marchand, B.*; Cantarel, V.

Proceedings of 1st International Conference on Innovation in Low-Carbon Cement and Concrete Technology (ILCCC 2019) (USB Flash Drive), 4 Pages, 2019/06

ジオポリマー(GP)セメントと有機液体からなる複合材料は、放射性有機液体廃棄物の管理のために、または相変化材料(PCM)として、多孔性制御媒体を合成するのに有用である。GPセメントは、大量の有機オイルをエマルションで新鮮なペーストに閉じ込めることができる。そのエマルション(GEOIL)は、GP硬化中は安定なままである。本報告では、1ミクロン$$^{3}$$ (= 1$$times$$10$$^{-6}$$m$$^{3}$$)のボクセルサイズの3D X線マイクロコンピューター断層撮影(マイクロCT)を使用することによって、GEOILペーストの3D油滴構造に対する調合パラメータ(油の割合, Si/Alモル比,界面活性剤)の影響を調べた。試料は新鮮な状態で乳し、硬化した状態で画像撮影した。気孔率,油滴サイズ分布、および油滴間の平均距離の全てを定量的に決定した。界面活性剤の存在により、著しく小さい油滴の形成が観察された。Si/Al比の増加も油滴サイズを減少させるが、その程度はより少ない。

論文

Evaluation and modelling report of Task 9A based on comparisons and analyses of predictive modelling results for the REPRO WPDE experiments; Task 9 of SKB Task Force GWFTS - Increasing the realism in solute transport modelling based on the field experiments REPRO and LTDE-SD

Soler, J. M.*; Neretnieks, I.*; Moreno, L.*; Liu, L.*; Meng, S.*; Svensson, U.*; Trinchero, P.*; Iraola, A.*; Ebrahimi, H.*; Molinero, J.*; et al.

SKB R-17-10, 153 Pages, 2019/01

SKBタスクフォースは、亀裂性岩石中の地下水流動と物質移行のモデル化に関する国際フォーラムである。WPDE試験はフィンランドのオンカロ地下施設において実施された片麻岩中のマトリクス拡散試験である。複数の非収着性及び収着性のトレーサーを含む模擬地下水が試錐孔の試験区間に沿って注入された。タスク9Aは、WPDE試験で得られたトレーサー破過曲線に対する予測モデリングを行うことを目的とした。複数のチームが本タスクに参加し、異なるモデル化手法を用いた予測解析を行った。この予測解析の重要な結論は、試錐孔の開口部における地下水流動に関連する分散パラメータにモデル化結果が大きく影響されることである。マトリクス拡散及び収着に関連する破過曲線のテール部に着目すると、異なるチーム間の解析結果の差異は相対的に小さい結果となった。モデル化結果は、最終的に実測された破過曲線と比較された。

論文

Effects of fine-scale surface alterations on tracer retention in a fractured crystalline rock from the Grimsel Test Site

舘 幸男; 伊藤 剛志*; 赤木 洋介*; 佐藤 久夫*; Martin, A. J.*

Water Resources Research, 54(11), p.9287 - 9305, 2018/11

 被引用回数:5 パーセンタイル:26.57(Environmental Sciences)

亀裂性結晶質岩中の放射性核種移行に対する割れ目表面の変質層の影響が、スイスのグリムゼル試験場の単一亀裂を有する花崗閃緑岩試料を用いた室内移行試験、表面分析、モデル化を組み合わせた包括的なアプローチによって調査された。5種類のトレーサーを用いた透過拡散試験,バッチ収着試験,通液試験を含む室内試験によって、移行遅延の程度はHDO, Se, Cs, Ni, Euの順に大きくなること、割れ目表面近傍に拡散に対する抵抗層が存在すること、拡散において陽イオン加速と陰イオン排除の効果が重要であることが確認された。X線CT及びEPMAによる観察から、割れ目周辺の鉱物分布の微視的な不均質性が把握された。これらの知見に基づき、風化したバーミキュライト層、配向した雲母層、マトリクス部から構成される3層モデルを構築し、それぞれの層の間隙率、収着・拡散パラメータを与えることで、通液試験で得られた全てのトレーサーの破過曲線と割れ目近傍のトレーサー濃度分布を良好に解釈することができた。

論文

Oxidation and reduction behaviors of a prototypic MgO-PuO$$_{2-x}$$ inert matrix fuel

三輪 周平; 逢坂 正彦

Journal of Nuclear Materials, 487, p.1 - 4, 2017/04

 被引用回数:4 パーセンタイル:37.06(Materials Science, Multidisciplinary)

MgOを母材としたPuO$$_{2-x}$$含有イナートマトリックス原型燃料の酸化還元挙動を熱分析により調べ、MgO-PuO$$_{2-x}$$試料の酸化還元速度を実験的に決定した。MgO-PuO$$_{2-x}$$試料の酸化還元速度はPuO$$_{2-x}$$試料に比べ低くなった。また、高い酸素分圧条件において、MgO-PuO$$_{2-x}$$試料の定比からのO/Pu比の変化はPuO$$_{2-x}$$試料に比べ小さくなることがわかった。これより、MgOを母材にすることによりイナートマトリックス燃料からの酸素供給及び放出が抑制されることがわかり、被覆管酸化等の観点で懸念となる高い酸素ポテンシャルを有するマイナーアクチニド酸化物の母材としてMgOが有効であることがわかった。

論文

資源エネルギー庁委託事業における低レベル放射性廃棄物のガラス固化技術の開発状況

福井 寿樹*; 牧 隆*; 三浦 信之; 塚田 毅志*

原子力バックエンド研究(CD-ROM), 23(2), p.169 - 173, 2016/12

次世代再処理ガラス固化技術基盤研究は、低レベル廃棄物をより安定した廃棄体とするためのガラス固化技術の基盤整備およびその知見を反映した高レベル廃液成分をより多くガラスに取り込む技術の開発を目的として、平成26年度から平成30年度までの5年間実施する計画である。

論文

Toward advancement of nuclear data research in the resonance region

国枝 賢; 柴田 恵一; 深堀 智生; 河野 俊彦*; Paris, M.*; Hale, G.*

JAEA-Conf 2015-003, p.33 - 38, 2016/03

共鳴領域における核反応断面積・共分散評価手法の進展に関して発表する。$$gamma$$線チャンネルの導入や荷電粒子弾性散乱に対するR行列計算コードの拡張について述べると共に、理論的拘束条件を効果的に用いた共鳴解析手法を示す。また、$$^8$$Beや$$^{17}$$O複合核システムに対する計算コード・解析手法の適用例を示し、さらに中重核に対する今後の展望を述べる。

論文

Comparative modeling of an in situ diffusion experiment in granite at the Grimsel Test Site

Soler, J. M.*; Landa, J.*; Havlov$'a$, V.*; 舘 幸男; 蛯名 貴憲*; Sardini, P.*; Siitari-Kauppi, M.*; Eikenberg, J.*; Martin, A. J.*

Journal of Contaminant Hydrology, 179, p.89 - 101, 2015/08

 被引用回数:39 パーセンタイル:81.5(Environmental Sciences)

マトリクス拡散現象は結晶質岩中の核種移行遅延プロセスとして重要である。スイスのグリムゼル原位置試験場において花崗岩マトリクス中の原位置長期拡散(LTD)試験を行った。試験孔内にHTO, Na $$^{+}$$, Cs $$^{+}$$を含むトレーサ溶液を循環させ、2年半の間、トレーサ濃度の減衰が観測された。拡散期間終了後に、オーバーコアリングによって、岩石中のトレーサ分布が分析された。岩石中の拡散深さは、HTOで20cm、Na $$^{+}$$で10cm、Cs $$^{+}$$で1cm程度であった。これらのデータセットに対し、拡散・収着モデルによる解釈が、複数のチームによって、異なるコードを用いて実施され、実効拡散係数(De)と岩石容量因子($$alpha$$)が導出された。複数のチームによる評価結果は、観測データを概ね再現可能であり、掘削影響による表面部分のDeと$$alpha$$の値が、岩石マトリックス部に比べて大きいことを示唆した。一方で、HTOの結果は実験データと解析結果に大きな乖離が認められ、この点は今後の詳細な検討が必要である。

論文

Exploring of peptides with affinity to HER2 from random peptide libraries using radioisotope; Random hexapeptide libraries with fixed amino acid sequence at 1 and 2 positions

佐々木 一郎; 花岡 宏史*; 山田 圭一*; 渡辺 茂樹; 須郷 由美; 大島 康宏; 鈴木 博元; 石岡 典子

Peptide Science 2014, p.257 - 260, 2015/03

We have sought to establish drug discovery system using radioisotope (RI) labeled peptides which have high affinity to target proteins overexpressed in cancers. Of the target proteins, we chose the human epidermal growth factor receptor type 2 (HER2), a membrane protein overexpressed in various cancers to evaluate the drug discovery system. Three series of random hexapeptide libraries introduced a radioiodinated D-tyrosine (y(3-$$^{131}$$I)) to $$N$$-terminal were designed and binding assay with HER2-expressed cell lines were conducted in this study. First, we synthesized a series of random hexapeptide libraries with fixed amino acid sequence at 1 and 2 positions, y(3-$$^{131}$$I)X$$^{1}$$X$$^{2}$$X$$^{3}$$X$$^{4}$$X$$^{5}$$X$$^{6}$$. Non-radioactive random peptide libraries, yXXXXXX, were prepared by Fmoc-SPPS with an automatic peptide synthesizer. Radioiodinated y(3-$$^{131}$$I)XXXXXX were subsequently synthesized in 30-50% radiochemical yield. Binding assay using HER2-overexpressed cell line showed that high affinity (38-50% dose, n=6) was obtained with yIIXXXX, while other random peptide libraries were yielded low affinity (approximately 1% dose), which indicated that the system using RI labeled random peptide libraries have potential to discover peptide drug for cancer therapy. Preparation of other random hexapeptide libraries are being undertaken.

論文

Internally Cu-stabilized RHQT Nb$$_{3}$$Al superconductors with Ta matrix

竹内 孝夫*; 田川 浩平*; 野田 哲司*; 伴野 信哉*; 飯嶋 安男*; 菊池 章弘*; 北口 仁*; 小菅 通雄*; 土屋 清澄*; 小泉 徳潔; et al.

IEEE Transactions on Applied Superconductivity, 16(2), p.1257 - 1260, 2006/06

 被引用回数:6 パーセンタイル:37.33(Engineering, Electrical & Electronic)

次期核融合炉では、16T以上の高磁場で大電流を流す導体が必要となる。急熱急冷変態法(RHQT)Nb$$_{3}$$Al線は、2次熱処理前に撚線加工が行えるので、RHQT-Nb$$_{3}$$Al CIC導体は、その有力な候補導体として考えられている。CIC導体で使用する丸線には、従来は、1900$$^{circ}$$C程度の1次熱処理でNb母材と反応しない銀を安定化材として使用していた。しかし、銀,Nbには放射化の問題があるため、タンタルを母材とし、安定化材として銅を使用する製造方法の開発を試みた。

論文

Method for detection of separatrix surface using differential double probe

雨宮 宏*; 上原 和也

Japanese Journal of Applied Physics, Part 1, 45(1A), p.247 - 249, 2006/01

 被引用回数:4 パーセンタイル:17.08(Physics, Applied)

トカマクの磁気面は磁気プローブの信号をもとにして平衡コードを用いた計算で推定されるが、その絶対位置については不明である。これを求めるために径方向に段差のついた2組のダブルプローブシステムに正負のバイアスをかけ、プラズマを動かしてプローブがセパラトリックス表面を横切った時に、ダブルプローブのイオン飽和電流値の増加が現われることに注目して、これを差動増幅器で精密に測定して評価した。さらに、得られる電流値はイオン温度の情報を有していることも示した。

論文

Estimation of covariance matrices for nuclear data of $$^{237}Np$$, $$^{241}Am$$ and $$^{243}Am$$

中川 庸雄

Journal of Nuclear Science and Technology, 42(11), p.984 - 993, 2005/11

 被引用回数:9 パーセンタイル:53.19(Nuclear Science & Technology)

JENDL-3.3に格納されている$$^{237}Np$$, $$^{241}Am$$及び$$^{243}Am$$の核分裂断面積,捕獲断面積及び核分裂あたりの放出中性子数に対する共分散マトリックスを推定した。核分裂断面積の共分散はGMAコード,捕獲断面積のそれはKALMANコードを用いて推定した。低エネルギー領域では、共鳴パラメータの誤差を与えた。即発中性子数は一次関数を仮定して、共分散を求めた。遅発中性子については誤差のみを与えた。結果はENDF-6フォーマットで編集し、JENDL-3.3のデータと合わせたデータファイルを作成した。

183 件中 1件目~20件目を表示